TORQUE Resource Manager > Appendices > Appendix A: Commands Overview > qmgr

qmgr

(PBS Queue Manager) PBS batch system manager.

Synopsis

qmgr [-a] [-c command] [-e] [-n] [-z] [server...]

Description

The qmgr command provides an administrator interface to query and configure batch system parameters (see Appendix B: Server Parameters).

The command reads directives from standard input. The syntax of each directive is checked and the appropriate request is sent to the batch server or servers.

The list or print subcommands of qmgr can be executed by general users. Creating or deleting a queue requires PBS Manager privilege. Setting or unsetting server or queue attributes requires PBS Operator or Manager privilege.

By default, the user root is the only PBS Operator and Manager. To allow other users to be privileged, the server attributes operators and managers will need to be set (i.e., as root, issue 'qmgr -c 'set server managers += <USER1>@<HOST>'). See TORQUE/PBS Integration Guide - RM Access Control.

If qmgr is invoked without the -c option and standard output is connected to a terminal, qmgr will write a prompt to standard output and read a directive from standard input.

Commands can be abbreviated to their minimum unambiguous form. A command is terminated by a new line character or a semicolon, ";", character. Multiple commands may be entered on a single line. A command may extend across lines by escaping the new line character with a back-slash "\".

Comments begin with the "#" character and continue to end of the line. Comments and blank lines are ignored by qmgr.

Options

Option	Name	Description
-a	---	Abort qmgr on any syntax errors or any requests rejected by a server.
-c	command	Execute a single command and exit qmgr.
-e	---	Echo all commands to standard output.
-n	---	No commands are executed, syntax checking only is performed.
-z	---	No errors are written to standard error.

Operands

The server operands identify the name of the batch server to which the administrator requests are sent. Each server conforms to the following syntax:

host_name[:port]

where host_name is the network name of the host on which the server is running and port is the port number to which to connect. If port is not specified, the default port number is used.

If server is not specified, the administrator requests are sent to the local server.

Standard input

The qmgr command reads standard input for directives until end of file is reached, or the exit or quit directive is read.

Standard output

If Standard Output is connected to a terminal, a command prompt will be written to standard output when qmgr is ready to read a directive.

If the -e option is specified, qmgr will echo the directives read from standard input to standard output.

Standard error

If the -z option is not specified, the qmgr command will write a diagnostic message to standard error for each error occurrence.

Directive syntax

A qmgr directive is one of the following forms:

command server [names] [attr OP value[,attr OP value,...]]
command queue [names] [attr OP value[,attr OP value,...]]
command node [names] [attr OP value[,attr OP value,...]]

where command is the command to perform on an object.

Commands are:

Command	Description
active	Sets the active objects. If the active objects are specified, and the name is not given in a qmgr cmd the active object names will be used.
create	Is to create a new object, applies to queues and nodes.
delete	Is to destroy an existing object, applies to queues and nodes.
set	Is to define or alter attribute values of the object.
unset	Is to clear the value of attributes of the object. This form does not accept an OP and value, only the attribute name.
list	Is to list the current attributes and associated values of the object.
print	Is to print all the queue and server attributes in a format that will be usable as input to the qmgr command.
names	Is a list of one or more names of specific objects The name list is in the form: [name][@server][,queue_name[@server]...] with no intervening white space. The name of an object is declared when the object is first created. If the name is @server, then all the objects of specified type at the server will be affected.
attr	Specifies the name of an attribute of the object which is to be set or modified. If the attribute is one which consist of a set of resources, then the attribute is specified in the form: attribute_name.resource_name
OP	Operation to be performed with the attribute and its value: "=" – set the value of the attribute. If the attribute has an existing value, the current value is replaced with the new value. "+=" – increase the current value of the attribute by the amount in the new value. "-=" – decrease the current value of the attribute by the amount in the new value.
value	The value to assign to an attribute. If the value includes white space, commas or other special characters, such as the "#" character, the value string must be enclosed in quote marks (").

The following are examples of qmgr directives:

create queue fast priority=10,queue_type=e,enabled = true,max_running=0

set queue fast max_running +=2

create queue little

set queue little resources_max.mem=8mw,resources_max.cput=10

unset queue fast max_running

set node state = "down,offline"

active server s1,s2,s3

list queue @server1

set queue max_running = 10 - uses active queues

Exit status

Upon successful processing of all the operands presented to the qmgr command, the exit status will be a value of zero.

If the qmgr command fails to process any operand, the command exits with a value greater than zero.