6.25
This topic provides the various software requirements and dependencies for the suite components (servers) for
On RHEL systems, you must be registered for a Red Hat subscription in order to have access to required RPM package dependencies.
In this topic:
- 6.25.1 Torque
- 6.25.2 Moab Workload Manager
- 6.25.3 Moab Accounting Manager
- 6.25.4 Moab Web Services
- 6.25.5 Moab Insight
- 6.25.6 Moab Viewpoint
- 6.25.7 RLM Server
- 6.25.8 Remote Visualization
- 6.25.9 Nitro
- 6.25.10 Nitro Web Services
If you intend to use Torque 6.0 with Moab Workload Manager, you must run Moab version 9.0 or 8.0 or later. Torque 6.0 will not work with versions earlier than Moab 8.0.
In this section:
6.25.1.A Supported Operating Systems
- CentOS 6.x, 7.x
- RHEL 6.x, 7.x
- Scientific Linux 6.x, 7.x
- SUSE Linux Enterprise Server 11, 12
6.25.1.B Software Requirements
- libxml2-devel package (package name may vary)
- openssl-devel package (package name may vary)
- Tcl/Tk version 8 or later if you plan to build the GUI portion of Torque or use a Tcl-based scheduler
- cpusets and cgroups
- NUMA-awareness uses cgroups, which include cpusets. Red Hat systems must use libcgroup version 0.40.rc1-16.el6 or later; SUSE systems need to use a comparative libcgroup version.
- cpusets: libhwloc 1.9.1 is the minimum supported, however NVIDIA K80 requires libhwloc 1.11.0. If you need to install libhwloc and the corresponding hwloc-devel package, see Linux Cpuset Support in the Torque Resource Manager Administrator Guide.
Using "
‑‑enable‑geometry‑requests is not compatible with ‑‑enable‑cgroups. In addition, if ‑‑enable‑cgroups is specified, ‑‑enable‑cpuset is ignored.
If you are building with cgroups enabled, you must have boost version 1.41 or later.
- if you build Torque from source (i.e. clone from github), the following additional software is required:
- gcc
- gcc-c++
- posix-compatible version of make
- libtool 1.5.22 or later
- boost-devel 1.36.0 or later
Red Hat 6-based systems come packaged with 1.41.0 and Red Hat 7-based systems come packaged with 1.53.0. If needed, use the --with-boost-path=DIR option to change the packaged boost version. See Customizing the Install
In this section:
- 6.25.2.A Supported Operating Systems
- 6.25.2.B Software Requirements
- 6.25.2.C Supported Resource Managers
6.25.2.A Supported Operating Systems
- CentOS 6.x, 7.x
- RHEL 6.x, 7.x
- Scientific Linux 6.x, 7.x
- SUSE Linux Enterprise Server 11, 12
A SUSE 11-based OS is only supported for Moab Server if your configuration does not include MWS.
6.25.2.B Software Requirements
-
- Perl 5.8.8 or later
- perl-CPAN (package name may vary)
- libxml2-devel (package name may vary)
- (Optional) Moab Accounting Manager 9.0
- (Optional) MongoDB 2.4.x; required for MWS or Insight
- (Optional) MySQL, PostgreSQL, or Oracle with ODBC driver (see Database Configuration in the Moab Workload Manager Administrator Guide for details)
6.25.2.C Supported Resource Managers
- Torque 5.0 or later
- SLURM
6.25.3 Moab Accounting Manager
MAM is commonly installed on the same host as Moab Workload Manager; however, in some cases you might obtain better performance by installing them on different hosts.
In this topic:
- 6.25.3.A Supported Operating Systems
- 6.25.3.B Software Requirements
- 6.25.3.C Depends On (not necessarily on the same host)
6.25.3.A Supported Operating Systems
- CentOS 6.x, 7.x
- RHEL 6.x, 7.x
- Scientific Linux 6.x, 7.x
- SUSE Linux Enterprise Server 11, 12
6.25.3.B Software Requirements
- gcc
- perl-suidperl
- httpd
- mod_ssl
- rrdtool
- Moab Workload Manager 9.0.3
- Perl modules; see 6.11 Installing Moab Accounting Manager (Manual Installation) 6.32 Installing Moab Accounting Manager (RPM Installation) for more details
6.25.3.C Depends On (not necessarily on the same host)
MAM uses an RDBMS as a back end.
- PostgreSQL 7.2 or later
Adaptive Computing recommends that the database used by MAM does not reside on the same host as the database used by Insight. However, if you choose to install the MAM PostgreSQL database on the same host where the Insight PostgreSQL database, then the MAM PostgreSQL database must be same version as the Insight PostgreSQL database. See 6.25.5 Moab Insight for supported database versions.
MWS Server must reside same host as Moab Server (Moab Server Host).
In this topic:
- 6.25.4.A Supported Operating Systems
- 6.25.4.B Software Requirements
- 6.25.4.C Depends On (not necessarily on the same host)
6.25.4.A Supported Operating Systems
- CentOS 6.x, 7.x
- RHEL 6.x, 7.x
- Scientific Linux 6.x, 7.x
- SUSE Linux Enterprise Server 12 (Fresh tarball installs are not supported. See Compatibility Requirements in 9.0.3 Release Notes Installation and Upgrade Information.)
6.25.4.B Software Requirements
- Moab Workload Manager 9.0.3
-
Oracle® Java® 8 Runtime Environment
Oracle Java 8 Runtime Environment is the recommended Java environment, but Oracle Java 7 is also supported. All other versions of Java, including OpenJDK/IcedTea, GNU Compiler for Java, and so on cannot run Moab Web Services.
- Apache Tomcat™ 7, 8
6.25.4.C Depends On (not necessarily on the same host)
- OpenLDAP or PAM; see 6.13 Installing Moab Web Services (Manual Installation) 6.34 Installing Moab Web Services (RPM Installation) for more details
- MongoDB® 2.4.x
Moab Workload Manager and Insight both tend to heavily consume system resources. The Insight Server and the Moab Server must run on different hosts.
Only an RPM-based installation is supported for installing Moab Insight.
In this section:
- 6.25.5.A Supported Operating Systems
- 6.25.5.B Software Requirements
- 6.25.5.C Depends On (not on the same host)
- 6.25.5.D Performance Benchmarks
6.25.5.A Supported Operating Systems
- CentOS 6.x, 7.x
- RHEL 6.x, 7.x
- Scientific Linux 6.x, 7.x
- SUSE Linux Enterprise Server 12
6.25.5.B Software Requirements
- Oracle® Java® 8 Runtime Environment
Oracle Java 8 Runtime Environment is the recommended Java environment, but Oracle Java 7 is also supported. All other versions of Java, including OpenJDK/IcedTea, GNU Compiler for Java, and so on cannot run Insight.
6.25.5.C Depends On (not on the same host)
- Moab Workload Manager 9.0.3
- MongoDB 2.4.x
- PostgreSQL 9.3 or later
6.25.5.D Performance Benchmarks
Adaptive Computing has tested and certified Insight's scale and performance under the following server configuration and load scenarios.
Server Configuration
Host hardware: 8 core AMD Opteron 6320 2.8 GHz servers, with 32GB of ram and a 500GB WD Blue hard drive
Installed services: Moab Workload Manager, Moab Web Services, Moab Insight, Moab Viewpoint (all at version 9.0.0 and running on the same host)
The benchmarks were ran with multiple services on a single host to benchmark Insight under very aggressive working conditions. Moab Insight must be installed on its own host.
Load Scenarios
| Jobs in queue | Avg Job Duration | Avg job Size (ppn) | Number of Nodes | Procs per Node | Avg Jobs per Week |
|---|---|---|---|---|---|
| 1000 | 200 | 32 | 500 | 32 | 25200 |
| 1000 | 60 | 32 | 500 | 32 | 84000 |
| 1000 | 10 | 32 | 500 | 32 | 504000 |
| 1000 | 200 | 16 | 6384 | 16 | 321754 |
| 1000 | 60 | 16 | 6384 | 16 | 1072512 |
| 1000 | 10 | 16 | 6384 | 16 | 6435072 |
| 10000 | 200 | 32 | 500 | 32 | 25200 |
| 10000 | 60 | 32 | 500 | 32 | 84000 |
| 10000 | 10 | 32 | 500 | 32 | 504000 |
| 10000 | 200 | 16 | 6384 | 16 | 321754 |
| 10000 | 60 | 16 | 6384 | 16 | 1072512 |
| 25000 | 200 | 32 | 500 | 32 | 25200 |
| 25000 | 60 | 32 | 500 | 32 | 84000 |
| 25000 | 10 | 32 | 500 | 32 | 504000 |
Only an RPM-based installation is supported for installing Moab Viewpoint.
In this section:
- 6.25.6.A Supported Operating Systems
- 6.25.6.B Depends On (not necessarily on the same host)
- 6.25.6.C Supported Browsers
6.25.6.A Supported Operating Systems
- CentOS 6.x, 7.x
- RHEL 6.x, 7.x
- Scientific Linux 6.x, 7.x
- SUSE Linux Enterprise Server 12
The Linux kernel version must be at least 2.6.13 and the giblic version must be at least 2.5.
6.25.6.B Depends On (not necessarily on the same host)
- Moab Web Services 9.0.3
- Moab Insight 9.0.3
- Mozilla Firefox 25+
- Internet Explorer 10+
- Chrome 35+
Remote Visualization and Nitro require access to a centralized Reprise License Manager (RLM) server.
Adaptive Computing strongly recommends that your RLM Server is version 12.1.2. RLM Server version 12.1.2 is packaged with Moab HPC Suite 9.0.2 or later.
This server is not load-extensive so it may be installed on any host within your Moab HPC Suite environment. It may also be installed on its own host.
If your company already utilizes an RLM Server, you do not have to install another as long as the Moab HPC Suite components can access it.
The host on which you install RLM Server must always be on and should have High Availability (uptime).
Remote Visualization comes packaged with FastX 2.2. FastX 2.2 requires reverse DNS to be set up on your network in order for the Gateway Server and Session Servers to resolve each other's IP addresses and hostnames. Without it, Session Servers will not be able to register correctly with the Gateway Server and authentication to the Gateway Server will fail.
Only an RPM-based installation is supported for installing Remote Visualization.
In this section:
- 6.25.8.A Supported Operating Systems
- 6.25.8.B License Requirements
- 6.25.8.C Software Requirements
- 6.25.8.D Depends On (not on the same host)
6.25.8.A Supported Operating Systems
- CentOS 6.x, 7.x
- RHEL 6.x, 7.x
- Scientific Linux 6.x, 7.x
- SUSE Linux Enterprise Server 12
Remote Visualization requires access to a centralized Reprise License Manager (RLM) server. See 6.25.7 RLM Server for more information.
6.25.8.C Software Requirements
The following software packages are also required. The installation of these packages are included in the Install Remote Visualization procedure.
- ImageMagick
- ImageMagick-perl
- perl-Crypt-SSLeay
- perl-X11-Protocol
In addition, each Session Server must include the graphical applications (resources) you will have Moab schedule. For example, desktop (gnome-session), xterm, firefox, chrome.
6.25.8.D Depends On (not on the same host)
- Torque Resource Manager 6.0.3
- Moab Workload Manager 9.0.3
- Moab Web Services 9.0.3
- Moab Insight 9.0.3
- Moab Viewpoint 9.0.3
When integrated with the Moab HPC Suite, Nitro resides on the Torque compute nodes.
In this section:
- 6.25.9.A Hardware Requirements
- 6.25.9.B Supported Operating Systems
- 6.25.9.C License Requirements
- 6.25.9.D Software Requirements
6.25.9.A Hardware Requirements
- Nitro requires one or more multi-core processors per host. Generally the more processors (sockets) and/or OS cores a host has, the more tasks Nitro can execute simultaneously on each host; although this will be application-dependent.
- It is recommended that hosts should have sufficient memory to execute as many applications as possible so that Nitro can run them at a rate of one application instance per OS core (especially if they are not multi-threaded). This eliminates the need for users to have to request memory in their Nitro task definitions.
See the Nitro Administrator Guide for information on specifying memory requirements.
6.25.9.B Supported Operating Systems
- CentOS 6.x, 7.x
- Red Hat 6.x, 7.x
- Scientific Linux 6.x, 7.x
- SUSE Linux Enterprise Server 11, 12
Nitro requires access to a centralized Reprise License Manager (RLM) server. See 6.25.7 RLM Server for more information.
6.25.9.D Software Requirements
Nitro is built with all needed libraries statically linked. This provides for a quick and simple installation and helps avoid troublesome library mismatches. No additional packages need to be installed on the compute nodes.
However, users running the nitrostat utility require Python 2.6.6 or later on the system from which they are running it.
Nitro Web Services is commonly installed on the Moab Server Host.
In this section:
6.25.10.A Supported Operating Systems
- CentOS 6.x, 7.x
- Red Hat 6.x, 7.x
- Scientific Linux 6.x, 7.x
- SUSE Linux Enterprise Server 12
6.25.10.B Depends On (not necessarily on the same host)
-
Nitro 2.0.0 – Installed on Torque compute nodes
A Nitro 2.0.0.1 release is available to fix an issue with Nitro Web Services for Red Hat 7-based systems.
- Viewpoint 9.0.3
- MongoDB 2.4.x