Conventions

checkjob

Synopsis

checkjob [-l policylevel] [-n nodeid] [-q qosid] [-r reservationid] [-v] [--flags=future] [--blocking] jobid

Overview

checkjob displays detailed job state information and diagnostic output for a specified job. Detailed information is available for queued, blocked, active, and recently completed jobs. The checkjob command shows the master job of an array as well as a summary of array sub-jobs, but does not display all sub-jobs. Use checkjob -v to display all job-array sub-jobs.

Access

This command can be run by level 1-3 Moab administrators for any job. Also, end users can use checkjob to view the status of their own jobs.

Arguments

> checkjob -v --blocking 1234

> checkjob -v --flags=future 6235

> checkjob -l SOFT 6235
> checkjob -l HARD 6235

> checkjob -n node113 6235

> checkjob -q special 6235

> checkjob -r orion.1 6235

-v (Verbose)
Description	Sets verbose mode. If the job is part of an array, the -v option shows pertinent array information before the job-specific information (see Example 2 and Example 3 for differences between standard output and -v output). Specifying the double verbose (-v -v) displays additional information about the job. See the Output table for details.
Example	> checkjob -v 6235

Details

This command allows any Moab administrator to check the detailed status and resource requirements of an active, queued, or recently completed job. Additionally, this command performs numerous diagnostic checks and determines if and where the job could potentially run. Diagnostic checks include policy violations, reservation constraints, preemption status, and job to resource mapping. If a job cannot run, a text reason is provided along with a summary of how many nodes are and are not available. If the -v flag is specified, a node by node summary of resource availability will be displayed for idle jobs.

Job Eligibility

If a job cannot run, a text reason is provided along with a summary of how many nodes are and are not available. If the -v flag is specified, a node by node summary of resource availability will be displayed for idle jobs. For job level eligibility issues, one of the following reasons will be given:

If a job cannot run on a particular node, one of the following 'per node' reasons will be given:

Reservation Access

The -r flag can be used to provide detailed information about job access to a specific reservation

Preemption Status

If a job is marked as a preemptor and the -v and -n flags are specified, checkjob will perform a job by job analysis for all jobs on the specified node to determine if they can be preempted.

Output

The checkjob command displays the following job attributes:

Attribute	Value	Description
Account	<STRING>	Name of account associated with job
Actual Run Time	[[[DD:]HH:]MM:]SS	Length of time job actually ran. This info is only displayed in simulation mode.
Allocated Nodes	Square bracket delimited list of node and processor ids	List of nodes and processors allocated to job
Applied Nodeset**	<STRING>	Node set used for job's node allocation
Arch	<STRING>	Node architecture required by job
Attr	square bracket delimited list of job attributes	Job Attributes (i.e. [BACKFILL][PREEMPTEE])
Available Memory**	<INTEGER>	The available memory requested by job. Moab displays the relative or exact value by returning a comparison symbol (>, <, >=, <=, or ==) with the value (i.e. Available Memory <= 2048).
Available Swap**	<INTEGER>	The available swap requested by job. Moab displays the relative or exact value by returning a comparison symbol (>, <, >=, <=, or ==) with the value (i.e. Available Swap >= 1024).
Average Utilized Procs*	<FLOAT>	Average load balance for a job
Avg Util Resources Per Task*	<FLOAT>
BecameEligible	<TIMESTAMP>	The date and time when the job moved from Blocked to Eligible.
Bypass	<INTEGER>	Number of times a lower priority job with a later submit time ran before the job
CheckpointStartTime**	[[[DD:]HH:]MM:]SS	The time the job was first checkpointed
Class	[<CLASS NAME> <CLASS COUNT>]	Name of class/queue required by job and number of class initiators required per task.
Dedicated Resources Per Task*	Space-delimited list of <STRING>:<INTEGER>	Resources dedicated to a job on a per-task basis
Disk	<INTEGER>	Amount of local disk required by job (in MB)
Estimated Walltime	[[[DD:]HH:]MM:]SS	The scheduler's estimated walltime. In simulation mode, it is the actual walltime.
EnvVariables**	Comma-delimited list of <STRING>	List of environment variables assigned to job
Exec Size*	<INTEGER>	Size of job executable (in MB)
Executable	<STRING>	Name of command to run
Features	Square bracket delimited list of <STRING>s	Node features required by job
Flags
Group	<STRING>	Name of UNIX group associated with job
Holds	Zero or more of User, System, and Batch	Types of job holds currently applied to job
Image Size	<INTEGER>	Size of job data (in MB)
IWD (Initial Working Directory)	<DIR>	Directory to run the executable in
Job Messages**	<STRING>	Messages attached to a job
Job Submission**	<STRING>	Job script submitted to RM
Memory	<INTEGER>	Amount of real memory required per node (in MB)
Max Util Resources Per Task*	<FLOAT>
NodeAccess*
Nodecount	<INTEGER>	Number of nodes required by job
Opsys	<STRING>	Node operating system required by job
Partition Mask	ALL or colon delimited list of partitions	List of partitions the job has access to
PE	<FLOAT>	Number of processor-equivalents requested by job
Per Partition Priority**	Tabular	Table showing job template priority for each partition
Priority Analysis**	Tabular	Table showing how job's priority was calculated: Job PRIORITY* Cred( User:Group:Class) Serv(QTime)
QOS	<STRING>	Quality of Service associated with job
Reservation	<RSVID> ( <TIME1> - <TIME2> Duration: <TIME3>)	RESID specifies the reservation id, TIME1 is the relative start time, TIME2 the relative end time, TIME3 the duration of the reservation
Req	[<INTEGER>] TaskCount: <INTEGER> Partition: <partition>	A job requirement for a single type of resource followed by the number of tasks instances required and the appropriate partition
StartCount	<INTEGER>	Number of times job has been started by Moab
StartPriority	<INTEGER>	Start priority of job
StartTime	<TIME>	Time job was started by the resource management system
State	One of Idle, Starting, Running, etc. See Job States for all possible values.	Current Job State
SubmitTime	<TIME>	Time job was submitted to resource management system
Swap	<INTEGER>	Amount of swap disk required by job (in MB)
Task Distribution*	Square bracket delimited list of nodes
Time Queued
Total Requested Nodes**	<INTEGER>	Number of nodes the job requested
Total Requested Tasks	<INTEGER>	Number of tasks requested by job
User	<STRING>	Name of user submitting job
Utilized Resources Per Task*	<FLOAT>
WallTime	[[[DD:]HH:]MM:]SS of [[[DD:]HH:]MM:]SS	Length of time job has been running out of the specified limit

In the above table, fields marked with an asterisk (*) are only displayed when set or when the -v flag is specified. Fields marked with two asterisks (**) are only displayed when set or when the -v -v flag is specified.

Example 4-1: checkjob 717

> checkjob 717
job 717
State: Idle
Creds:  user:jacksond  group:jacksond  class:batch
WallTime: 00:00:00 of 00:01:40
SubmitTime: Mon Aug 15 20:49:41
  (Time Queued  Total: 3:12:23:13  Eligible: 3:12:23:11)
TerminationDate:   INFINITY  Sat Oct 24 06:26:40
Total Tasks: 1
Req[0]  TaskCount: 1  Partition: ALL
Network: ---  Memory >= 0  Disk >= 0  Swap >= 0
Opsys: ---  Arch: ---  Features: ---

IWD:            /home/jacksond/moab/moab-4.2.3
Executable:     STDIN
Flags:          RESTARTABLE,NORMSTART
StartPriority:  5063
Reservation '717' (  INFINITY ->   INFINITY  Duration: 00:01:40)
Note:  job cannot run in partition base (idle procs do not meet requirements : 0 of 1 procs found)
idle procs:   4  feasible procs:   0
Rejection Reasons: [State        :    3][ReserveTime  :    1]
cannot select job 717 for partition GM (partition GM does not support requested class batch)

Example 4-2: Using checkjob (no -v) on a job array master job:

checkjob array.1
job array.1

AName: array 
Job Array Info: 
  Name: array.1 

Sub-jobs:         10 
  Active:          6 ( 60.0%)
  Eligible:        2 ( 20.0%)
  Blocked:         2 ( 20.0%) 
  Complete:        0 (  0.0%)

Example 4-3: Using checkjob -v on a job array master job:

$ checkjob -v array.1
job array.1

AName: array 
Job Array Info: 
  Name: array.1 
  1 : array.1.1 : Running 
  2 : array.1.2 : Running 
  3 : array.1.3 : Running 
  4 : array.1.4 : Running 
  5 : array.1.5 : Running 
  6 : array.1.6 : Running 
  7 : array.1.7 : Idle 
  8 : array.1.8 : Idle 
  9 : array.1.9 : Blocked
  10 : array.1.10 : Blocked

Sub-jobs:         10 
  Active:          6 ( 60.0%)
  Eligible:        2 ( 20.0%)
  Blocked:         2 ( 20.0%) 
  Complete:        0 (  0.0%)

Related topics 

• showhist.moab.pl - explains how to query for past job information
• Moab Client Installation - explains how to distribute this command to client nodes
• mdiag -j command - display additional detailed information regarding jobs
• showq command - showq high-level job summaries
• JOBCPURGETIME parameter - specify how long information regarding completed jobs is maintained
• diagnosing job preemption

© 2014 Adaptive Computing