1.0 Installation and configuration > 1.3 Advanced configuration > 1.3.1 Customizing the install

1.3.1 Customizing the install

The TORQUE configure command has several options available. Listed below are some suggested options to use when running ./configure.

Table 1-1: Optional Features

Option Description
--disable-clients Directs TORQUE not to build and install the TORQUE client utilities such as qsub, qstat, qdel, etc.
--disable-FEATURE Do not include FEATURE (same as --enable-FEATURE=no).
--disable-libtool-lock Avoid locking (might break parallel builds).
--disable-mom Do not include the MOM daemon.
--disable-mom-checkspool Don't check free space on spool directory and set an error.
--disable-posixmemlock Disable the MOM's use of mlockall. Some versions of OSs seem to have buggy POSIX MEMLOCK.
--disable-privports Disable the use of privileged ports for authentication. Some versions of OSX have a buggy bind() and cannot bind to privileged ports.
--disable-qsub-keep-override Do not allow the qsub -k flag to override -o -e.
--disable-server Do not include server and scheduler.
--disable-shell-pipe Give the job script file as standard input to the shell instead of passing its name via a pipe.
--disable-spool If disabled, TORQUE will create output and error files directly in $HOME/.pbs_spool if it exists or in $HOME otherwise. By default, TORQUE will spool files in TORQUE_HOME/spool and copy them to the users home directory when the job completes.
--disable-xopen-networking With HPUX and GCC, don't force usage of XOPEN and libxnet.
--enable-acct-x Enable adding x attributes to accounting log.
--enable-array Setting this under IRIX enables the SGI Origin 2000 parallel support. Normally autodetected from the /etc/config/array file.
--enable-blcr Enable BLCR support.
--enable-cpa Enable Cray's CPA support.
--enable-cpuset

Enable Linux 2.6 kernel cpusets.

It is recommended that you turn on this feature to prevent a job from expanding across more CPU cores than it is assigned.
--enable-debug Prints debug information to the console for pbs_server and pbs_mom while they are running. (This is different than --with-debug which will compile with debugging symbols.)
--enable-dependency-tracking Do not reject slow dependency extractors.
--enable-drmaa Build the DRMAA 1.0 library.
--enable-fast-install[=PKGS] Optimize for fast installation [default=yes].
--enable-FEATURE[=ARG] Include FEATURE [ARG=yes].
--enable-filesync Open files with sync on each write operation. This has a negative impact on TORQUE performance. This is disabled by default.
--enable-force-nodefile Forces creation of nodefile regardless of job submission parameters. Not on by default.
--enable-gcc-warnings Enable gcc strictness and warnings. If using gcc, default is to error on any warning.
--enable-geometry-requests TORQUE is compiled to use procs_bitmap during job submission.
--enable-gui Include the GUI-clients.
--enable-maintainer-mode This is for the autoconf utility and tells autoconf to enable so called rebuild rules. See maintainer mode for more information.
--enable-maxdefault

Turn on the RESOURCEMAXDEFAULT flag.

Versions of TORQUE earlier than 2.4.5 attempted to apply queue and server defaults to a job that didn't have defaults specified. If a setting still did not have a value after that, TORQUE applied the queue and server maximum values to a job (meaning, the maximum values for an applicable setting were applied to jobs that had no specified or default value).

In TORQUE 2.4.5 and later, the queue and server maximum values are no longer used as a value for missing settings. To re-enable this behavior in TORQUE 2.4.5 and later, use --enable-maxdefault.
--enable-nochildsignal Turn on the NO_SIGCHLD flag.
--enable-nodemask Enable nodemask-based scheduling on the Origin 2000.
--enable-pemask Enable pemask-based scheduling on the Cray T3e.
--enable-plock-daemons[=ARG] Enable daemons to lock themselves into memory: logical-or of 1 for pbs_server, 2 for pbs_scheduler, 4 for pbs_mom (no argument means 7 for all three).
--enable-quickcommit Turn on the QUICKCOMMIT flag.
--enable-shared[=PKGS] Build shared libraries [default=yes].
--enable-shell-use-argv Enable this to put the job script name on the command line that invokes the shell. Not on by default. Ignores --enable-shell-pipe setting.
--enable-sp2 Build PBS for an IBM SP2.
--enable-srfs Enable support for SRFS on Cray.
--enable-static[=PKGS] Build static libraries [default=yes].
--enable-syslog Enable (default) the use of syslog for error reporting.
--enable-tcl-qstat Setting this builds qstat with Tcl interpreter features. This is enabled if Tcl is enabled.
--enable-unixsockets Enable the use of Unix Domain sockets for authentication.

Table 1-2: Optional packages

Option Description
--with-blcr=DIR BLCR installation prefix (Available in versions 2.5.6 and 3.0.2 and later).
--with-blcr-include=DIR Include path for libcr.h (Available in versions 2.5.6 and 3.0.2 and later).
--with-blcr-lib=DIR Lib path for libcr (Available in versions 2.5.6 and 3.0.2 and later).
--with-blcr-bin=DIR Bin path for BLCR utilities (Available in versions 2.5.6 and 3.0.2 and later).
--with-cpa-include=DIR Include path for cpalib.h.
--with-cpa-lib=DIR Lib path for libcpalib.
--with-debug Compile with debugging symbols.
--with-default-server=HOSTNAME Set the name of the computer that clients will access when no machine name is specified as part of the queue name. It defaults to the hostname of the machine on which PBS is being compiled.
--with-environ=PATH Set the path containing the environment variables for the daemons. For SP2 and AIX systems, suggested setting is to /etc/environment. Defaults to the file "pbs_environment" in the server-home. Relative paths are interpreted within the context of the server-home.
--with-gnu-ld Assume the C compiler uses GNU ld [default=no].
--with-maildomain=MAILDOMAIN Override the default domain for outgoing mail messages, i.e. "user@maildomain". The default maildomain is the hostname where the job was submitted from.
--with-modulefiles[=DIR] Use module files in specified directory [/etc/modulefiles].
--with-momlogdir Use this directory for MOM logs.
--with-momlogsuffix Use this suffix for MOM logs.
--without-PACKAGE Do not use PACKAGE (same as --with-PACKAGE=no).
--without-readline Do not include readline support (default: included if found).
--with-PACKAGE[=ARG] Use PACKAGE [ARG=yes].
--with-pam=DIR Directory that holds the system PAM modules. Defaults to /lib(64)/security on Linux.
--with-pic Try to use only PIC/non-PIC objects [default=use both].
--with-qstatrc-file=FILE Set the name of the file that qstat will use if there is no ".qstatrc" file in the directory where it is being invoked. Relative path names will be evaluated relative to the server home directory (see above). If this option is not specified, the default name for this file will be set to "qstatrc" (no dot) in the server home directory.
--with-rcp One of "scp", "rcp", "mom_rcp", or the full path of a remote file copy program. scp is the default if found, otherwise mom_rcp is used. Some rcp programs don't always exit with valid error codes in case of failure. mom_rcp is a copy of BSD rcp included with this source that has correct error codes, but it is also old, unmaintained, and doesn't have large file support.
--with-sched=TYPE Sets the scheduler type. If TYPE is "c", the scheduler will be written in C. If TYPE is "tcl" the server will use a Tcl based scheduler. If TYPE is "basl", TORQUE will use the rule based scheduler. If TYPE is "no", then no scheduling is done. "c" is the default.
--with-sched-code=PATH Sets the name of the scheduler to use. This only applies to BASL schedulers and those written in the C language. For C schedulers this should be a directory name and for BASL schedulers a filename ending in ".basl". It will be interpreted relative to srctree/src/schedulers.SCHD_TYPE/samples. As an example, an appropriate BASL scheduler relative path would be "nas.basl". The default scheduler code for "C" schedulers is "fifo".
--with-scp In TORQUE 2.1 and later, SCP is the default remote copy protocol. See --with-rcp if a different protocol is desired.
--with-sendmail[=FILE] Sendmail executable to use.
--with-server-home=DIR Set the server home/spool directory for PBS use. Defaults to /var/spool/torque.
--with-server-name-file=FILE Set the file that will contain the name of the default server for clients to use. If this is not an absolute pathname, it will be evaluated relative to the server home directory that either defaults to /usr/spool/PBS or is set using the --with-server-home option to configure. If this option is not specified, the default name for this file will be set to "server_name".
--with-tcl Directory containing tcl configuration (tclConfig.sh).
--with-tclatrsep=CHAR Set the Tcl attribute separator character this will default to "." if unspecified.
--with-tclinclude Directory containing the public Tcl header files.
--with-tclx Directory containing tclx configuration (tclxConfig.sh).
--with-tk Directory containing tk configuration (tkConfig.sh).
--with-tkinclude Directory containing the public Tk header files.
--with-tkx Directory containing tkx configuration (tkxConfig.sh).
--with-tmpdir=DIR Set the tmp directory that pbs_mom will use. Defaults to "/tmp". This is a Cray-specific feature.
--with-xauth=PATH Specify path to xauth program.

HAVE_WORDEXP

Wordxp() performs a shell-like expansion, including environment variables. By default, HAVE_WORDEXP is set to 1 in src/pbs_config.h. If set to 1, will limit the characters that can be used in a job name to those allowed for a file in the current environment, such as BASH. If set to 0, any valid character for the file system can be used.

If a user would like to disable this feature by setting HAVE_WORDEXP to 0 in src/include/pbs_config.h, it is important to note that the error and the output file names will not expand environment variables, including $PBS_JOBID. The other important consideration is that characters that BASH dislikes, such as (), will not be allowed in the output and error file names for jobs by default.

Related topics 

 

© 2012 Adaptive Computing