showbf

Synopsis

showbf [-A] [-a account] [-c class] [-d duration] [-D] [-f features] [-g group] [-L] 
       [-m [==|>|>=|<|<=] memory] [-n nodecount] [-p partition] [-q qos] [-u user] [-v]

Overview

Shows what resources are available for immediate use.

This command can be used by any user to find out how many processors are available for immediate use on the system. It is anticipated that users will use this information to submit jobs that meet these criteria and thus obtain quick job turnaround times. This command incorporates down time, reservations, and node state information in determining the available backfill window.

NoteIf specific information is not specified, showbf will return information for the user and group running but with global access for other credentials. For example, if '-q qos' is not specified, Moab will return resource availability information for a job as if it were entitled to access all QOS based resources (i.e., resources covered by reservations with a QOS based ACL), if '-c class' is not specified, the command will return information for resources accessible by any class.
NoteThe showbf command incorporates node configuration, node utilization, node state, and node reservation information into the results it reports. This command does not incorporate constraints imposed by credential based fairness policies on the results it reports.

Access

By default, this command can be used by any user or administrator.

Parameters

ParameterDescription
Account name.
Class/queue required.
Time duration specified as the number of seconds or in [DD:]HH:MM:SS notation.
Colon separated list of node features required.
Specify particular group.
Memory comparison used with the -m flag. Valid signs are >, >=, ==, <=, and <.
Specifies the amount of required real memory configured on the node, (in MB), used with the -m flag.
Specify number of nodes for inquiry with -n flag.
Specify partition to check with -p flag.
Specify QOS to check with -q flag.
Specify particular user to check with -u flag.

Flags

FlagDescription
Show resource availability information for all users, groups, and accounts. By default, showbf uses the default user, group, and account ID of the user issuing the command.
Show resource availability information only for specified account.
Show resource availability information for specified duration.
Display current and future resource availability notation.
Show resource availability information only for specified group.
Help for this command.
Enforce Hard limits when showing available resources.
Allows user to specify the memory requirements for the backfill nodes of interest. It is important to note that if the optional MEMCMP and MEMORY parameters are used, they MUST be enclosed in single ticks (') to avoid interpretation by the shell. For example, enter showbf -m '==256' to request nodes with 256 MB memory.
Show resource availability information for a specified number of nodes. That is, this flag can be used to force showbf to display only blocks of resources with at least this many nodes available.
Show resource availability information for the specified partition.
Show information for the specified QOS.
Show resource availability for the specified processor count.
Show resource availability information only for specified user.

Example 1

In this example, a job requiring up to 2 processors could be submitted for immediate execution in partition ClusterA for any duration. Additionally, a job requiring 1 processor could be submitted for immediate execution in partition ClusterB. Note that by default, each task is tracked and reported as a request for a single processor.
> showbf
Partition     Tasks  Nodes   StartOffset      Duration       StartDate
---------     -----  -----  ------------  ------------  --------------
ALL               3      3      00:00:00      INFINITY  11:32:38_08/19
ReqID=0
ClusterA          1      1      00:00:00      INFINITY  11:32:38_08/19
ReqID=0
ClusterB          2      2      00:00:00      INFINITY  11:32:38_08/19
ReqID=0

Example 2

In this example, the output verifies that a backfill window exists for jobs requiring a 3 hour runtime and at least 16 processors. Specifying job duration is of value when time based access is assigned to reservations (i.e., using the SRCFG TIMELIMIT ACL)

> showbf -r 16 -d 3:00:00
Partition Tasks Nodes Duration StartOffset StartDate
--------- ----- ----- -------- ----------- ---------
ALL 20 20 INFINITY 00:00:00 09:22:25_07/19

Example 3

In this example, a resource availability window is requested for processors located only on nodes with at least 512 MB of memory.

> showbf -m ' =512'
Partition Tasks Nodes Duration StartOffset StartDate
--------- ----- ----- -------- ----------- ---------
ALL 20 20 INFINITY 00:00:00 09:23:23_07/19
ClusterA 10 10 INFINITY 00:00:00 09:23:23_07/19
ClusterB 10 10 INFINITY 00:00:00 09:23:23_07/19

See Also

Copyright © 2012 Adaptive Computing Enterprises, Inc.®