Introduction
This test determines if the proper environment has been established.
Test steps
Submit a test job and the issue a hold on the job.
> qsub -c enabled test.sh
999.xxx.yyy
> qhold 999
Possible failures
Normally the result of qhold is nothing. If an error message is produced saying that qhold is not a supported feature then one of the following configuration errors might be present.
Successful results
If no configuration was done to specify a specific directory location for the checkpoint file, the default location is off of the TORQUE directory, which in my case is /var/spool/torque/checkpoint.
Otherwise, go to the specified directory for the checkpoint image files. This was done by either specifying an option on job submission, i.e. -c dir=/home/test or by setting an attribute on the execution quere. This is done with the command qmgr -c 'set queue batch checkpoint_dir=/home/test'.
Doing a directory listing shows the following.
# find /var/spool/torque/checkpoint
/var/spool/torque/checkpoint
/var/spool/torque/checkpoint/999.xxx.yyy.CK
/var/spool/torque/checkpoint/999.xxx.yyy.CK/ckpt.999.xxx.yyy.1205266630
# find /var/spool/torque/checkpoint |xargs ls -l
-r-------- 1 root root 543779 2008-03-11 14:17 /var/spool/torque/checkpoint/999.xxx.yyy.CK/ckpt.999.xxx.yyy.1205266630
/var/spool/torque/checkpoint:
total 4
drwxr-xr-x 2 root root 4096 2008-03-11 14:17 999.xxx.yyy.CK
/var/spool/torque/checkpoint/999.xxx.yyy.CK:
total 536
-r-------- 1 root root 543779 2008-03-11 14:17 ckpt.999.xxx.yyy.1205266630
Doing a qstat -f command should show the job in a held state, job_state = H. Note that the attribute checkpoint_name is set to the name of the file seen above.
If a checkpoint directory has been specified, there will also be an attribute checkpoint_dir in the output of qstat -f.
$ qstat -f
Job Id: 999.xxx.yyy
Job_Name = test.sh
Job_Owner = [email protected]
resources_used.cput = 00:00:00
resources_used.mem = 0kb
resources_used.vmem = 0kb
resources_used.walltime = 00:00:06
job_state = H
queue = batch
server = xxx.yyy
Checkpoint = u
ctime = Tue Mar 11 14:17:04 2008
Error_Path = xxx.yyy:/home/test/test.sh.e999
exec_host = test/0
Hold_Types = u
Join_Path = n
Keep_Files = n
Mail_Points = a
mtime = Tue Mar 11 14:17:10 2008
Output_Path = xxx.yyy:/home/test/test.sh.o999
Priority = 0
qtime = Tue Mar 11 14:17:04 2008
Rerunable = True
Resource_List.neednodes = 1
Resource_List.nodect = 1
Resource_List.nodes = 1
Resource_List.walltime = 01:00:00
session_id = 9402 substate = 20
Variable_List = PBS_O_HOME=/home/test,PBS_O_LANG=en_US.UTF-8,
PBS_O_LOGNAME=test,
PBS_O_PATH=/usr/local/perltests/bin:/home/test/bin:/usr/local/s bin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games,
PBS_O_SHELL=/bin/bash,PBS_SERVER=xxx.yyy,
PBS_O_HOST=xxx.yyy,PBS_O_WORKDIR=/home/test,
PBS_O_QUEUE=batch
euser = test
egroup = test
hashname = 999.xxx.yyy
queue_rank = 3
queue_type = E comment = Job started on Tue Mar 11 at 14:17
exit_status = 271
submit_args = test.sh
start_time = Tue Mar 11 14:17:04 2008
start_count = 1
checkpoint_dir = /var/spool/torque/checkpoint/999.xxx.yyy.CK
checkpoint_name = ckpt.999.xxx.yyy.1205266630
Related topics
© 2012 Adaptive Computing