(Click to open topic with navigation)

You are here: RPM Installation > Installation and Configuration > Installing RLM Server

3.13 Installing RLM Server

Access to a Reprise License Manager (RLM) server is required when using Moab's Elastic Computing Feature, Viewpoint's Remote Visualization Feature, or Nitro.

As the RLM Server can run multiple licenses, it is recommended that you install one RLM Server for your configuration. If your company already uses an RLM Server, you do not need to install a new one for Adaptive Computing products. However, Adaptive Computing strongly recommends that your RLM Server is version 12.1BL2 and the Adaptive Computing products may use a different port than the default RLM Server port (5053).

If your system configuration requires more than one RLM Server, additional configuration may be needed. See 2.16 Using Multiple RLM Servers for more information.

This topic contains instructions on how to install an RLM Server.

In this topic:

3.13.1 Open Necessary Ports

These instructions assume you are using the default ports. If your configuration will use other ports, then substitute your port numbers when opening the ports.

If your site is running firewall software on its hosts, you will need to configure the firewall to allow connections to the necessary ports.

Location Ports Functions When Needed
RLM Server Host 5053 RLM Server Port Always
RLM Server Host 5054 RLM Web Interface Port Always
RLM Server Host 57889 Remote Visualization Port If Remote Visualization is part of your configuration
RLM Server Host 5135 ISV adaptiveco Port (for the Adaptive license-enabled products) For Moab Workload Manager and if Nitro is part of your configuration.

See 2.11 Opening Ports in a Firewall for general instructions and an example of how to open ports in the firewall.

3.13.2 Install the RLM Server

On the host on where the RLM Server will reside, do the following:

  1. If you are installing RLM Server on its own host or on a host that does not have another RPM installation, complete the steps to prepare the host. See 3.3 Preparing for RPM Installs for more information.
  2. If your configuration uses firewalls, you must also open the necessary ports before installing the RLM Server. See 3.13.1 Open Necessary Ports.
  3. Install the RPM. 
    [root]# yum install ac-rlm

3.13.3 Change the Default Passwords

The RLM Web interface includes two usernames (admin and user) by default. These usernames have the default password "changeme!".

If you do not change this password, RLM, and Remote Visualization, will not be secure. For tips on choosing a good password, see https://www.us-cert.gov/ncas/tips/ST04-002.

Do the following for both the user and the admin usernames:

  1. Using a web browser, navigate to your RLM instance. (http://<RLM_host>:5054; where <RLM_host> is the IP address or name of the RLM Server Host).

    If you have problems connecting using the web browser, on the RLM server check /opt/rlm/rlm.dll for error information.

  2. Log in.
  3. Select Change Password and change the password according to your password security process.

The password for "user" will be needed as part of the Remote Visualization installation.

© 2016 Adaptive Computing