Conventions

11.7 Enabling Generic Metrics

• Configuring Generic Metrics
• Example Generic Metric Usage

Moab allows organizations to enable generic performance metrics. These metrics allow decisions to be made and reports to be generated based on site specific environmental factors. This increases Moab's awareness of what is occurring within a given cluster environment, and allows arbitrary information to be associated with resources and the workload within the cluster. Uses of these metrics are widespread and can cover anything from tracking node temperature, to memory faults, to application effectiveness.

• Execute triggers when specified thresholds are reached
• Modify node allocation affinity for specific jobs
• Initiate automated notifications when thresholds are reached
• Display current, average, maximum, and minimum metrics values in reports and charts within Moab Cluster Manager

11.7-A Configuring Generic Metrics

A new generic metric is automatically created and tracked at the server level if it is reported by either a node or a job.

To associate a generic metric with a job or node, a native resource manager must be set up and the GMETRIC attribute must be specified. For example, to associate a generic metric of temp with each node in a TORQUE cluster, the following could be reported by a native resource manager:

# temperature output
node001 GMETRIC[temp]=113
node002 GMETRIC[temp]=107
node003 GMETRIC[temp]=83
node004 GMETRIC[temp]=85
...

Generic metrics are tracked as floating point values allowing virtually any number to be reported.

In the preceding example, the new metric, temp, can now be used to monitor system usage and performance or to allow the scheduler to take action should certain thresholds be reached. Some uses include the following:

• Executing triggers based on generic metric thresholds
• Adjust a node's availability for accepting additional workload
• Adjust a node's allocation priority
• Initiate administrator notification of current, minimum, maximum, or average generic metric values
• Use metrics to report resource and job performance
• Use metrics to report resource and job failures
• Using job profiles to allow Moab to learn which resources best run which applications
• Tracking effective application efficiency to identify resource brown outs even when no node failure is obvious
• Viewing current and historical cluster-wide generic metric values to identify failure, performance, and usage
• Enable charging policies based on consumption of generic metrics patterns
• View changes in generic metrics on nodes, jobs, and cluster wide over time
• Submit jobs with generic metric based node-allocation requirements

Generic metric values can be viewed using checkjob, checknode, mdiag -n, mdiag -j, or Moab Cluster Manager Charting and Reporting Features.

Historical job and node generic metric statistics can be cleared using the mjobctl and mnodectl commands.

11.7-B Example Generic Metric Usage

As an example, consider a cluster with two primary purposes for generic metrics. The first purpose is to track and adjust scheduling behavior based on node temperature to mitigate overheating nodes. The second purpose is to track and charge for utilization of a locally developed data staging service.

The first step in enabling a generic metric is to create probes to monitor and report this information. Depending on the environment, this information may be distributed or centralized. In the case of temperature monitoring, this information is often centralized by a hardware monitoring service and available via command line or an API. If monitoring a locally developed data staging service, this information may need to be collected from multiple remote nodes and aggregated to a central location. The following are popular freely available monitoring tools:

Once the needed probes are in place, a native resource manager interface must be created to report this information to Moab. Creating a native resource manager interface should be very simple, and in most cases a script similar to those found in the $TOOLSDIR($PREFIX/tools) directory can be used as a template. For this example, we will assume centralized information and will use the RM script that follows:

#!/usr/bin/perl
# 'hwctl outputs information in format '<NODEID> <TEMP>'
open(TQUERY,"/usr/sbin/hwctl -q temp |");
while (<TQUERY>)
  {
  my $nodeid,$temp = split /\w+/;
  $dstage=GetDSUsage($nodeid);
  print "$nodeid GMETRIC[temp]=$temp GMETRIC[dstage]=$dstage
";
  }

With the script complete, the next step is to integrate this information into Moab. This is accomplished with the following configuration line:

RMCFG[local] TYPE=NATIVE CLUSTERQUERYURL=file://$TOOLSDIR/node.query.local.pl
...

If the checknode command is run, output similar to the following is reported:

> checknode cluster013
...
Generic Metrics:  temp=113.2,dstage=23748
...

The next step in configuring Moab is to inform Moab to take certain actions based on the new information it is tracking. For this example, there are two purposes. The first purpose is to get jobs to avoid hot nodes when possible. This is accomplished using the GMETRIC attribute of the Node Allocation Priority function as in the following example:

NODEALLOCATIONPOLICY PRIORITY
NODECFG[DEFAULT] PRIORITYF=PRIORITY-10*GMETRIC[temp]
...

This simple priority function reduces the priority of the hottest nodes making such less likely to be allocated. See Node Allocation Priority Factors for a complete list of available priority factors.

The example cluster is also interested in notifying administrators if the temperature of a given node ever exceeds a critical threshold. This is accomplished using a trigger. The following line will send email to administrators any time the temperature of a node exceeds 120 degrees.

NODECFG[DEFAULT] TRIGGER=atype=mail,etype=threshold,threshold=gmetric[temp]>120,action='warning: node $OID temp high'
...

Related topics 

• Simulation Overview
• Generic Consumable Resources
• Object Variables
• Generic Event Counters

© 2014 Adaptive Computing